The BTQ-SG8 secondary global unit is an extension unit for BTQ-/VM4VM8 main controller. Up to 64 BTQ-/VM4VM8 or BTQ-SG8 can be cascaded via full redundancy global-net.
The BTQ-SG8 is capable of handling 1000W speaker load per zone and 2000W max. per BTQ-SG8 unit. The BTQ-SG8 extends the number of input and output contacts available in the system, including 9 monitored EVAC inputs triggered either by dry contact or relay, 8 logic control inputs and 8 relay control outputs. The two digital interfaces can connect up to 8 paging consoles or remote units for each, and be wired in a daisy chain or redundant loop. It is also equipped with a USB port for message or music files playing.
In accordance with EN54-16 and UL2572, all BOUTIQUE system components and peripherals are monitored, this monitoring extends from a paging microphone capsule to the end of loudspeaker lines. The speaker lines are monitored for short, open circuit and leakage. In addition, volume attenuators can be installed on a monitored speaker lines. The BTQ-SG8 is also a eco-friendly product with extremely low power consumption during standby mode.
- Support up to 16,384 zones connected to 64 x BTQ-VM4/VM8/SG8 via global-net
- Control, management and monitoring via web browser
- Paging with priority management, event and bell scheduler
- USB interface for messages and music files
- Internal message storage for up to 90 minutes
- Both background music playing and paging can be simultaneously proceeded
- Easy integration with Terracom and IP-PBX via SIP protocol
- VoIP interface with standard SIP protocol
- Paging source can be programmed with 1~99 level priority
- Enhanced loudspeaker line surveillance for AB-zoned installation
- Extremely low power consumption during standby mode
- Volume attenuators can be installed on monitored speaker lines
- 9 monitored EVAC inputs, 8 logic control inputs, 8 relay control outputs
- 1 Fault relays & 1 EVAC relay output
- 2 digital paging and control console interfaces
- 1 USB 2.0 port
- Third party control via RS232 or Ethernet
Electrical
- DC power input: 21 - 29 VDC
- Power consumption
- Full power: 15 W
- Standby mode: 4 W
Audio Characteristics
- A/D-D/A bit resolution: 24 bit
- Sampling rate: 48k Hz
- Frequency response: 20 Hz ~ 20k Hz (±1 dB) @ 0 dBu
- THD+N: < 0.01 % @ 0 dB gain, 4 dBu (1k Hz) in
- EIN: < -80 dBu @ 0 dB gain
- SNR: > 80 dB
- Maximum output level: 17 dBu
- Crosstalk: > 93 dB @ 0 dB gain, 0 dBu (10k Hz) in
- Output impedance: 30 ohm
Wattage Capacity
- 1000 W per zone (max.)/2000 W per unit (max.)
Mechanical
- Dimensions (W x H x D): 1 RU high, 437 x 44 x 258.5 mm
- Weight: 2.6 kg (5.7 lbs)
- Mounting: 19" 1U rack
- Colour: RAL7016
| Type |
File Name |
Download |
| Brochure |
| [PDF] |
Boutique System_Brochure_Fi |
|
| Type |
File Name |
Download |
| Catalogue |
| [PDF] |
Boutique_Catalogue |
|
| Brochure |
| [PDF] |
Boutique System_Brochure |
|
| Datasheet |
| [PDF] |
BTQ-SG8_Datasheet |
|
| Type |
File Name |
Download |
| Fiche produit |
| [PDF] |
BTQ-SG8_Fiche Produit |
|
| Type |
File Name |
Download |
| Broschüre |
| [PDF] |
Boutique System_Brochure |
|
| Type |
File Name |
Download |
| Brošure |
| [PDF] |
BOUTIQUE_Brochure |
|
| Type |
File Name |
Download |
| Folleto |
| [PDF] |
Sistema Boutique_Folleto |
|
