CD-TOUCH-AS
Wall mounted cabinet remote paging console EN54-16

CD-TOUCH-AS

The CD-TOUCH paging console is a paging interface that allows call-paging, message broadcasting and DSP matrix parameter control. It contains a 5” full-colour backlit touch-screen for simple, user-friendly operation. The screen offers up to 168 buttons across 12 pages which can be freely assigned in the software to any zone or group of zones. Each key contains a colour-changing field indicating if the zone is occupied by a different process. In addition, the CD-TOUCH has 3 hardware keys that can be assigned within the system control software.

All paging parameters for site operation can be pre-programmed and stored within the console, including message triggering, level adjustment and pre-call chime setup. Zone assignment, naming and grouping can also be preconfigured.

The CD-Touch-XX units connect to a monitored bus on CAT-5 FTP/STP. This connection also provides Power Over Ethernet (POE). In case POE is not available, or if the cable run is greater than 100m, an additional power connection is provided for 24V DC.
The ATEÏS range of security systems complies with current architectural demands requiring IP and/or fibreoptic networking to allow for even the most complex of system designs. ATEÏS responds to Public Address and Voice Alarm requirements as stated in EN54-16, ISO 7240-16 and BS5839/8, with specific attributes for compliance in large
installations. CD-TOUCH is available in two different versions for compatibility with different systems. Both are identical in hardware and functionality but require different firmware.
 
CD-TOUCH-AS: For use with IDA8 and ECS system controllers and slaves
CD-TOUCH-G2: For use with DIVA8 system controllers

 

• Wall-mount metal enclosure with lockable cover
• Secured CAT-5 link to controllers and slaves
• Monitoring of microphone capsule specifications
• Monitoring loudspeaker
• 5” full colour touch-screen, 800x480 pixels
• 14 pages of 12 buttons
• Power, Fault and Evac indicators
• Comprehensive system status informationfrom touch-screen
• EN54-16 certified.

Technical Specifications

Electrical
Battery power supply
Voltage: 18 - 26 VDC
Power consumption: 250 mA
Performance
Frequency response: -3 dB @ 40 Hz and 18 kHz
THD: < 0,1% @ 1 kHz
Output level: Max -6 dBu
Noise gate threshold: -84 dBu – 24 dBu
Attack time: 8 ms
Release time: 100 ms
Output impedance: 100 Ohm
Monitoring speaker
Impedance: 4 Ohm
Output power: 1 W @ 1 Khz
Frequency response: -3 dB @ 200 to 12 kHz
System Connection
Cable type CAT-5 (FTP)
Length 100 m (max.)
Mechanical
Dimensions (H x W x D) 210 x 400 x 130 mm
Weight 4.5 kg (9.9 lb)
Colour RAL7016
Environmental
Operating temperature: -5 ºC to +55 ºC (+23 ºF to +131 ºF)
Storage temperature: -40 ºC to +70 ºC (-40 ºF to +158 ºF)
Relative humidity: 15% to 90%
Air pressure: 600 to 1100 h Pa.